Measuring programs
Measuring program 315
for measuring the protuberance on cylindrical hobs. The protuberance amount, height and angle as well as the edge breakage height on the left and right tooth flank are determined.
Measuring program 720
for measuring the axial relief on the tooth flanks of hobs. The exact contour of the relief is recorded and analyzed with the scanning probe.
Measuring program 412
for tactile measurement of cutting wheels with measuring probe and evaluation according to DIN 1829. Straight and helical cutting wheels can be measured. The axial run-out, rake angle at the tooth tip and the rake face pitch angle (for helical cutting wheels) are determined.
Measuring program 512
for the measurement of hobbing gears in transmitted and incident light with evaluation according to DIN 1829. The program determines concentricity deviation on the pitch and tip circle, individual pitch deviation left/right, pitch step left/right, total pitch deviation left/right, tooth thickness variation, rake angle on the tooth tip and the rake face pitch angle.
