With »pomBasic« and »pomBasicMicro«, the right camera can be selected for every tool area; the only difference between the devices is the camera technology.
Individual personalization of the user interface (layout) makes operation very simple, fast and efficient.
Both camera variants have a digital zoom function.
Yes, there are various measurement functions for wear measurements. These measurements can be made in the µm range and the logs can be created in the tool view and as a result.
Yes, with the digital background function, visual inspection is very quick for all operators.
Yes, the camera's macro function records the measurement sequence once and can be called up as often as required for repeat measurements.
Yes, all tools can be compared with the target/actual contour using the DXF function. The deviations are output in the test report.
There is an automatic illumination setting for reflected light before each measurement. In addition, the illumination setting for reflected light and transmitted light can be saved individually in the respective tool ID and called up again.
Ideally, the diameter range for the »pomBasic« starts from 3 mm increasing, for »pomBasicMicro« the diameter range starts from 0.2 mm increasing.
Yes, the travel paths of the X and Y axes are the same for both device variants, so even larger diameters can be measured with »pomBasicMicro«.
A large number of tool holders are available for a wide range of tool areas.
ZOLLER is continuously expanding the measuring functions of the »pomSoft« software for process-oriented measuring. Customer-specific solutions can be integrated within this framework.
Yes, there are individual options within the scope of ISO certification, for full-service maintenance, standard quality control, quality control and maintenance.
